Chappell E. - Autodesk Drainage Design for Infraworks 360 Essentials: Autodesk Official Press

Acquisitions Editor: Stephanie McComb

Development Editor: Clark David
Technical Editor: Tom Richardson
Production Editor: Joel Jones
Copy Editor: Kathy Grider-Carlyle
Editorial Manager: Mary Beth Wakefield
Production Manager: Kathleen Wisor
Associate Publisher: Jim Minatel
Proofreader: Kathryn Duggan
Indexer: Nancy Guenther
Project Coordinator, Cover: Brent Savage
Cover Designer: Wiley
Cover Image: Kileman/iStockphoto; Back Cover Images: Courtesy of Eric Chappell

Copyright 2015 by John Wiley & Sons, Inc., Indianapolis, Indiana
Published simultaneously in Canada

ISBN: 978-1-119-05934- 9

ISBN: 978-1-119-05954-7 (ebk.)

ISBN: 978-1-119-05962-2 (ebk.)

No part of this publication may be reproduced, stored in a retrieval system or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, scanning or otherwise, except as permitted under Sections 107 or 108 of the 1976 United States Copyright Act, without either the prior written permission of the Publisher, or authorization through payment of the appropriate per-copy fee to the Copyright Clearance Center, 222 Rosewood Drive, Danvers, MA 01923, (978) 750-8400, fax (978) 646-8600. Requests to the Publisher for permission should be addressed to the Permissions Department, John Wiley & Sons, Inc., 111 River Street, Hoboken, NJ 07030, (201) 748-6011, fax (201) 748-6008, or online at http://www.wiley.com/go/permissions

Limit of Liability/Disclaimer of Warranty: The publisher and the author make no representations or warranties with respect to the accuracy or completeness of the contents of this work and specifically disclaim all warranties, including without limitation warranties of fitness for a particular purpose. No warranty may be created or extended by sales or promotional materials. The advice and strategies contained herein may not be suitable for every situation. This work is sold with the understanding that the publisher is not engaged in rendering legal, accounting, or other professional services. If professional assistance is required, the services of a competent professional person should be sought. Neither the publisher nor the author shall be liable for damages arising herefrom. The fact that an organization or Web site is referred to in this work as a citation and/or a potential source of further information does not mean that the author or the publisher endorses the information the organization or Web site may provide or recommendations it may make. Further, readers should be aware that Internet Web sites listed in this work may have changed or disappeared between when this work was written and when it is read.

For general information on our other products and services or to obtain technical support, please contact our Customer Care Department within the U.S. at (877) 762-2974, outside the U.S. at (317) 572-3993 or fax (317) 572-4002.

Wiley publishes in a variety of print and electronic formats and by print-on-demand. Some material included with standard print versions of this book may not be included in e-books or in print-on-demand. If this book refers to media such as a CD or DVD that is not included in the version you purchased, you may download this material at http://booksupport.wiley.com

For more information about Wiley products, visit www.wiley.com.

Library of Congress Control Number: 2015943419

TRADEMARKS: Wiley, the Wiley logo, and the Sybex logo are trademarks or registered trademarks of John Wiley & Sons, Inc. and/or its affiliates, in the United States and other countries, and may not be used without written permission. Autodesk and InfraWorks are registered trademarks of Autodesk, Inc. All other trade marks are the property of their respective owners. John Wiley & Sons, Inc. is not associated with any product or vendor mentioned in this book.

To Earl Waddell

Even though I now work for Autodesk, it is amazing to me how far this software has advanced in a single year. So much has happened with Drainage Design for InfraWorks 360 that I had to create an additional chapter to cover it all. These are truly exciting times in the world of design software, and I'm so fortunate to have a role in it.

Thanks to Stephanie McComb for getting this book out of the gate for a second edition and for working with me on some very demanding schedules. Tom Richardson was the technical editor for this and all the other InfraWorks 360 books, and I can't think of anyone else I'd rather have when it comes to providing a thorough and insightful technical working over. And last but certainly not least, thanks to Kim Wimpsett and Kathy Grider-Carlyle for your tireless efforts correcting my writing and making it so much better.

I say it in every book, and it's true every time: my family takes the brunt of the condition that is book writing. I hope that all of the time and effort is worth it and that this book, like the others, will serve as an example of quality work to my children and a source of pride for my wife.

Eric Chappell has been working, teaching, writing, and consulting in the world of civil engineering software for more than 20 years, and he is a recognized expert in the world of Autodesk InfraWorks 360 software. In September 2013, Eric joined the Autodesk family as a Premium Services Specialist and has since taken on the role of Community Evangelist for InfraWorks 360. In the 12 years prior to working for Autodesk, he wrote training materials and performed training for end users, trainers, and Autodesk employees around the globe. For several years, he has worked with Autodesk in authoring and developing two Autodesk certification exams. He also served as design systems manager for Timmons Group, a civil engineering and surveying firm based in Richmond, Virginia, where he managed software, standards, and training for more than 200 users. Eric is also a highly rated instructor at Autodesk University, where he has taught for the past 10 years.

Prior to writing and consulting, Eric spent nearly 10 years in the civil engineering and surveying fields while working for the H.F. Lenz Company in Johnstown, Pennsylvania. During his time at H.F. Lenz, he gained considerable practical experience as a survey crewman, designer, engineer, and CAD supervisor. Eric also holds a B.S. degree in civil engineering technology from the University of Pittsburgh at Johnstown and is certified in Pennsylvania as an EIT.

Eric is originally from southwestern Pennsylvania, but he has lived in the Richmond, Virginia, area for the past 14 years with his wife and four children. He enjoys being outdoors and spending time with his family. He can sometimes be seen playing drums for the band Sons of Zebedee, which performs at a variety of events in central Virginia.

If you would like to contact the author regarding comments or suggestions, please email .

I can't imagine writing a book or learning a new program in a more exciting time. We in the civil engineering, planning, construction, geospatial, and other related fields are experiencing the changing of the guard, a new era in design software technology. The Autodesk AutoCAD Civil 3D software is still the powerful flagship that is a global monument to civil engineering design, but there is a new kid on the blockand he's quick, smart, and attractive, and he's a great communicator. His name is Autodesk InfraWorks 360.