Baichtal John - Make: 3D Printing Projects

by Brook Drumm , James Floyd Kelly , John Edgar Park , Brian Roe , John Baichtal , Rick Winscot , Steven Bolin Nick Ernst , and Caleb Cotter

Copyright 2016 Brook Drumm, James Floyd Kelly, John Edgar Park, Brian Roe, John Baichtal, Steven Bolin, Rick Winscot, Nick Ernst, and Caleb Cotter. All rights reserved.

Printed in Canada.

Published by Maker Media, Inc. , 1160 Battery Street East, Suite 125, San Francisco, CA 94111.

Maker Media books may be purchased for educational, business, or sales promotional use. Online editions are also available for most titles (http://safaribooksonline.com). For more information, contact our corporate/institutional sales department: 800-998-9938 or corporate@oreilly.com .

• Editor: Anna Kaziunas France
• Production Editor: Nicholas Adams
• Copyeditor: Charles Roumeliotis
• Proofreader: Kim Cofer
• Indexer: Wendy Catalano
• Interior Designer: David Futato and Anna Kaziunas France
• Cover Designer: Anna Kaziunas France
• Illustrator: Rebecca Demarest

• October 2015: First Edition

See http://oreilly.com/catalog/errata.csp?isbn=9781457187247 for release details.

The Make logo is a registered trademark of Maker Media, Inc. Make: 3D Printing Projects, the cover image, and related trade dress are trademarks of Maker Media, Inc.

Many of the designations used by manufacturers and sellers to distinguish their products are claimed as trademarks. Where those designations appear in this book, and Maker Media, Inc., was aware of a trademark claim, the designations have been printed in caps or initial caps.

While the publisher and the authors have used good faith efforts to ensure that the information and instructions contained in this work are accurate, the publisher and the authors disclaim all responsibility for errors or omissions, including without limitation responsibility for damages resulting from the use of or reliance on this work. Use of the information and instructions contained in this work is at your own risk. If any code samples or other technology this work contains or describes is subject to open source licenses or the intellectual property rights of others, it is your responsibility to ensure that your use thereof complies with such licenses and/or rights.

978-1-4571-8724-7

[TI]

Its time to stop treating 3D printers like standalone machinestheyre just another tool in your toolbox.

Youre holding a book full of projects, ranging from simple and utilitarian to the utterly fantastical. While these projects require a 3D printer to produce custom parts, each utilizes a unique combination of electronics, hand assembly techniques, and additional tools, parts, and software. The printer is a custom fabrication enabler, but its what you create with it that matters.

Because weve rejected the hype that puts the printer on a pedestal and embraced the another tool philosophy, weve found our printers to continue to prove themselves time-saving, multifaceted machines. By reducing the amount of time spent in front of traditional tools, they speed our making. Why drill a 1/4 hole in a small component when you can design the part with the hole already properly and accurately placed?

The additive process also saves us time, money, and pain. Hobbyists who use wood or aluminum for their mock-ups spend a good portion of their time measuring, cutting, and drilling. As mistakes are made or small modifications must be incorporated, they often have to start again from scratch. And again. And again.

This cycle is dramatically shortened when you design in software, test print, tweak, then reprint, as exemplified in by the Raygun Pen projects pile of prototyped handles. A new piece can be printing while you work on another aspect of your project, or engage in something more mundane, like doing the dishes or mowing the lawn.

But a 3D printer cant do it all. If your project needs some LED lighting or motors added, those cant be printed up, wired, and soldered together to create a final product.

Perhaps youve had a 3D printer for some time now, or were looking for a reason to buy one, but the Yoda head figurines are no longer novel. Your machine may even be sitting in the corner, gathering dust. We say its time to put that printer back to work!

Each design in this book was envisioned, lovingly prototyped, and assembled by a unique individual. Together, they exemplify the broad range of highly personalized, limit-pushing project possibilities enabled by the printing of parts, fusion of tools, and wide availability of affordable electronic components.

Even if youve never touched a printer, we hope these projects excite and embolden you to learn new skills, extend your current abilities, and awaken your creative impulses. If youre inspired to go make something after reading this book, then weve done our job.

Brook Drumm, Founder and CEO of Printrbot

James Floyd Kelly, Writer. Maker. Adventurer