Francis H. Froes - Additive Manufacturing for the Aerospace Industry

1. Tables in 1
2. Tables in 2
3. Tables in 3
4. Tables in 5
5. Tables in 6
6. Tables in 7
7. Tables in 9
8. Tables in 10
9. Tables in 11
10. Tables in 13
11. Tables in 16
12. Tables in 17
13. Tables in 19
14. Tables in 20

1. Figures in 1
2. Figures in 2
3. Figures in 3
4. Figures in 4
5. Figures in 5
6. Figures in 6
7. Figures in 7
8. Figures in 8
9. Figures in 9
10. Figures in 10
11. Figures in 11
12. Figures in 12
13. Figures in 13
14. Figures in 14
15. Figures in 16
16. Figures in 17
17. Figures in 18
18. Figures in 19
19. Figures in 20

Edited by

Francis Froes

Light Metals Industry, Tacoma, WA, United States

Advanced Materials Industries, Tacoma, WA, United States

Rodney Boyer

RBTi Consulting, Bellevue, WA, United States

School of Materials Science and Engineering, University of Shanghai for Science and Technology, Shanghai, P.R. China

Elsevier

Radarweg 29, PO Box 211, 1000 AE Amsterdam, Netherlands

The Boulevard, Langford Lane, Kidlington, Oxford OX5 1GB, United Kingdom

50 Hampshire Street, 5th Floor, Cambridge, MA 02139, United States

Copyright 2019 Elsevier Inc. All rights reserved.

No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying, recording, or any information storage and retrieval system, without permission in writing from the publisher. Details on how to seek permission, further information about the Publishers permissions policies and our arrangements with organizations such as the Copyright Clearance Center and the Copyright Licensing Agency, can be found at our website: www.elsevier.com/permissions.

This book and the individual contributions contained in it are protected under copyright by the Publisher (other than as may be noted herein).

Notices

Knowledge and best practice in this field are constantly changing. As new research and experience broaden our understanding, changes in research methods, professional practices, or medical treatment may become necessary.

Practitioners and researchers must always rely on their own experience and knowledge in evaluating and using any information, methods, compounds, or experiments described herein. In using such information or methods they should be mindful of their own safety and the safety of others, including parties for whom they have a professional responsibility.

To the fullest extent of the law, neither the Publisher nor the authors, contributors, or editors, assume any liability for any injury and/or damage to persons or property as a matter of products liability, negligence or otherwise, or from any use or operation of any methods, products, instructions, or ideas contained in the material herein.

British Library Cataloguing-in-Publication Data

A catalogue record for this book is available from the British Library

Library of Congress Cataloging-in-Publication Data

A catalog record for this book is available from the Library of Congress

ISBN: 978-0-12-814062-8

For Information on all Elsevier publications visit our website at https://www.elsevier.com/books-and-journals

Publisher: Matthew Deans

Acquisition Editor: Christina Gifford

Editorial Project Manager: Andrae Akeh

Production Project Manager: Kamesh Ramajogi

Cover Designer: Matthew Limbert

Typeset by MPS Limited, Chennai, India

Thomas K. Ales , Department of Materials Science and Engineering, Iowa State University, Ames, IA, United States

Leonard J. Bond

Center for Nondestructive Evaluation, Applied Sciences Complex II, Iowa State University, Ames, IA, United States

Department of Mechanical Engineering, Iowa State University, Ames, IA, United States

Department of Aerospace Engineering, Iowa State University, Ames, IA, United States

Rodney Boyer

School of Materials Science and Engineering, University of Shanghai for Science and Technology, Shanghai, P.R. China

RBTi Consulting, Bellevue, WA, United States

Sheng Cao

Monash Centre for Additive Manufacturing (MCAM), Monash University, Notting Hill, VIC, Australia

School of Materials Science and Engineering, University of Shanghai for Science and Technology, Shanghai, P.R. China

Wei Chen , AVIC Manufacturing Technology Institute, Beijing, P.R. China

Zhuoer Chen

Department of Mechanical and Aerospace Engineering, Monash University, Clayton, VIC, Australia

Monash Centre for Additive Manufacturing (MCAM), Monash University, Notting Hill, VIC, Australia

Sergei A. Chizhik

Presidium of the National Academy of Sciences of Belarus, Minsk, Republic of Belarus

A.V. Lykov Heat and Mass Transfer Institute of the National Academy of Sciences of Belarus, Minsk, Republic of Belarus

Peter C. Collins , Department of Materials Science and Engineering, Iowa State University, Ames, IA, United States

Chris H.J. Davies

Department of Mechanical and Aerospace Engineering, Monash University, Clayton, VIC, Australia

Monash Centre for Additive Manufacturing (MCAM), Monash University, Notting Hill, VIC, Australia

Agustin Diaz , REM Surface Engineering, Brenham, TX, United States

B. Dutta , DM3D Technology, Auburn Hills, MI, United States

Francis Froes

Light Metals Industry, Tacoma, WA, United States

Advanced Materials Industries, Tacoma, WA, United States

Lawrence Gasman , SmarTech Markets Publishing Crozet, Virginia, United States

Shishkovsky Igor , Center for Design, Manufacturing and Materials, Skolkovo Institute of Science and Technology, Moscow, Russia

Orest Ivasishin , G.V. Kurdyumov Institute for Metal Physics, Kyiv, Ukraine

Qingbo Jia

Department of Materials Science and Engineering, Monash University, Clayton, VIC, Australia

Monash Centre for Additive Manufacturing (MCAM), Monash University, Notting Hill, VIC, Australia

Manish Kamal , Arconic Inc., Arconic Fastening Systems, Carson, CA, United States

Mikhail L. Kheifetz

Presidium of the National Academy of Sciences of Belarus, Minsk, Republic of Belarus

State Scientific and Production Association Center of the National Academy of Sciences of Belarus, Minsk, Republic of Belarus

Lucas W. Koester , Center for Nondestructive Evaluation, Applied Sciences Complex II, Iowa State University, Ames, IA, United States

Dmytro Kovalchuk , JSC NVO Chervona Hvilya, Kyiv, Ukraine

Anja Loesser , EOS North America Inc

Zhiqiang Li , AVIC Manufacturing Technology Institute, Beijing, P.R. China

Brain W. Martin , Department of Materials Science and Engineering, Iowa State University, Ames, IA, United States

Kevin Minet , EOS Finland Oy

Thomas F. Murphy , Hoeganaes Specialty Metal Powders LLC, Cinnaminson, NJ, United States