Bill Hylton - Yard and Garden Furniture (New 2nd Edition): Plans and Step-by-Step Instructions to Create 20 Useful Outdoor Projects

Yard and Garden

FURNITURE

2ND EDITION

Plans and Step-by-Step Instructions to Create 20 Useful Outdoor Projects

Bill Hylton

Copyright 2020 Bill Hylton and Creative Homeowner

This book may not be reproduced, either in part or in its entirety, in any form, by any means, without written permission from the publisher, with the exception of brief excerpts for purposes of radio, television, or published review. All rights, including the right of translation, are reserved. Note: Be sure to familiarize yourself with manufacturers instructions for tools, equipment, and materials before beginning a project. Although all possible measures have been taken to ensure the accuracy of the material presented, neither the author nor the publisher is liable in case of misinterpretation of directions, misapplication, or typographical error.

For a printable PDF of the patterns used in this book, please contact Fox Chapel Publishing at , quoting the ISBN and title of this book, as well as the pattern or patterns required.

Creative Homeowner is a registered trademark of New Design Originals Corporation.

Yard and Garden Furniture, 2nd Edition

Editor: David Schiff

Designer: David Fisk

Print ISBN 978-1-58011-850-7
eISBN 978-1-58011-850-7

The Cataloging-in-Publication Data is on file with the Library of Congress.

We are always looking for talented authors. To submit an idea, please send a brief inquiry to acquisitions@foxchapelpublishing.com.

Creative Homeowner, www.creativehomeowner.com, is an imprint of New Design Originals Corporation and distributed exclusively in North America by Fox Chapel Publishing Company, Inc., 800-457-9112, 903 Square Street, Mount Joy, PA 17552, and in the United Kingdom by Grantham Book Service, Trent Road, Grantham, Lincolnshire, NG31 7XQ.

METRIC CONVERSION

Length

Area

Volume

Common Lumber Equivalents

Sizes: Metric cross sections are so close to their nearest U.S. sizes, as noted below, that for most purposes they may be considered equivalents.

Capacity

Temperature

Celsius = (Fahrenheit 32) x 5/9

SAFETY

Though all the designs and methods in this book have been reviewed for safety, it is not possible to overstate the importance of using the safest possible construction methods. What follows are reminderssome dos and donts of work procedures and tool safety that apply to construction projects in general. They are not substitutes for your own common sense.

Always use caution, care, and good judgment when following the instructions and procedures described in this book.

Always be sure that the electrical setup is safe, that no circuit is overloaded, and that all power tools and outlets are properly grounded. Do not use power tools in wet locations.

Always read container labels on paints, solvents, and other products; provide ventilation; and observe all other warnings.

Always read the manufacturers instructions for using a tool, especially the warnings.

Use hold-downs and push sticks whenever possible when working on a table saw. Avoid working short pieces if you can.

Always remove the key from any drill chuck (portable or press) before starting the drill.

Always pay deliberate attention to how a tool works so that you can avoid being injured.

Always know the limitations of your tools. Do not try to force them to do what they were not designed to do.

Always make sure that any adjustment is locked before proceeding. For example, always check the rip fence on a table saw or the bevel adjustment on a portable saw before starting to work.