Lijie Grace Zhang - 3D Bioprinting and Nanotechnology in Tissue Engineering and Regenerative Medicine

Academic Press is an imprint of Elsevier

32 Jamestown Road, London NW1 7BY, UK

525 B Street, Suite 1800, San Diego, CA 92101-4495, USA

225 Wyman Street, Waltham, MA 02451, USA

The Boulevard, Langford Lane, Kidlington, Oxford OX5 1GB, UK

Copyright 2015 Elsevier Inc. All rights reserved.

No part of this publication may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, mechanical, photocopying, recording or otherwise without the prior written permission of the publisher

Permissions may be sought directly from Elseviers Science & Technology Rights

Department in Oxford, UK: phone (+44) (0) 1865 843830; fax (+44) (0) 1865 853333; email: for further information

Notice

British Library Cataloguing-in-Publication Data

A catalogue record for this book is available from the British Library

Library of Congress Cataloging-in-Publication Data

A catalog record for this book is available from the Library of Congress

ISBN: 978-0-12-800547-7

Acquisition Editor: Fiona Geraghty

Editorial Project Manager: Natasha Welford

Production Project Manager: Jason Mitchell

Designer: Christian Bilbow

Typeset by Thomson Digital

Printed and bound in the United States

Amir Azhari , Department of Mechanical and Mechatronics Engineering, University of Waterloo, Waterloo, ON, Canada

Ahmad Basalah , Department of Mechanical and Mechatronics Engineering, University of Waterloo, Waterloo, ON, Canada

Nathan J. Castro , Department of Mechanical and Aerospace Engineering, The George Washington University, Washington DC, USA

Robert C. Chang , Department of Mechanical Engineering, Stevens Institute of Technology, Hoboken, NJ, USA

Shaochen Chen , Department of NanoEngineering, University of California, San Diego, La Jolla, CA, USA

Boris Chichkov , Nanotechnology Department, Laser Zentrum Hannover e.V., Hollerithallee 8, Hannover, Germany

Douglas B. Chrisey , Department of Physics and Engineering Physics, Tulane University, New Orleans, LA, USA

David T. Corr , Department of Biomedical Engineering, Rensselaer Polytechnic Institute, Troy, NY, USA

J. Lowry Curly , Department of Biomedical Engineering, Tulane University, New Orleans, LA, USA

Darryl D. DLima , Shiley Center for Orthopaedic Research and Education at Scripps Clinic, La Jolla, CA, USA

David Dean , Department of Plastic Surgery, The Ohio State University, Columbus, OH, USA

Andrew D. Dias , Department of Biomedical Engineering, Rensselaer Polytechnic Institute, Troy, NY, USA

Amir Dorafshar , Department of Plastic and Reconstructive Surgery, Johns Hopkins University School of Medicine, Baltimore, MD, USA

Erik W. Dorth , Shiley Center for Orthopaedic Research and Education at Scripps Clinic, La Jolla, CA, USA

John P. Fisher , Fischell Department of Bioengineering, University of Maryland, College Park, Maryland, USA

Warren L. Grayson , Department of Biomedical Engineering, Translational Tissue Engineering Center, Johns Hopkins University School of Medicine, Baltimore, MD, USA

Bagrat Grigoryan , Department of Bioengineering, Rice University, Houston, TX, USA

Shawn P. Grogan , Shiley Center for Orthopaedic Research and Education at Scripps Clinic, La Jolla, CA, USA

Benjamin Holmes , Department of Mechanical and Aerospace Engineering, The George Washington University, Washington DC, USA

John F. Hornick , Finnegan, Henderson, Farabow, Garrett & Dunner, LLP, Washington, DC, USA

Yong Huang , Department of Mechanical & Aerospace Engineering, University of Florida, Gainesville, FL, USA

Ben P. Hung , Department of Biomedical Engineering, Translational Tissue Engineering Center, Johns Hopkins University School of Medicine, Baltimore, MD, USA

Pinar Yilgor Huri , Department of Biomedical Engineering, Translational Tissue Engineering Center, Johns Hopkins University School of Medicine, Baltimore, MD, USA

Rita Kandel , Mount Sinai Hospital, University of Toronto, Toronto, ON, Canada

David M. Kingsley , Department of Biomedical Engineering, Rensselaer Polytechnic Institute, Troy, NY, USA

Lothar Koch , Nanotechnology Department, Laser Zentrum Hannover e.V., Hollerithallee 8, Hannover, Germany

Michael Larsen , Department of Plastic Surgery, The Ohio State University, Columbus, OH, USA

Wei Li , Department of Mechanical Engineering, University of Texas, Austin, TX, USA

Xuanyi Ma , Department of NanoEngineering, University of California, San Diego, La Jolla, CA, USA

Stefanie Michael , Department of Plastic, Hand- and Reconstructive Surgery, Hannover Medical School, Hannover, Germany

Jordan S. Miller , Department of Bioengineering, Rice University, Houston, TX, USA

Michael Miller , Department of Plastic Surgery, The Ohio State University, Columbus, OH, USA

Lee Jia Min , School of Mechanical & Aerospace Engineering, Nanyang Technological University, Singapore

Ruchi Mishra , Department of Plastic Surgery, The Ohio State University, Columbus, OH, USA

Christopher OBrien , Department of Mechanical and Aerospace Engineering, The George Washington University, Washington DC, USA

JinGyu Ock , Department of Mechanical Engineering, University of Texas, Austin, TX, USA

Theresa B. Phamduy , Department of Biomedical Engineering, Tulane University, New Orleans, LA, USA

Jesse K. Placone , Fischell Department of Bioengineering, University of Maryland, College Park, Maryland, USA

Kai Rajan , Finnegan, Henderson, Farabow, Garrett & Dunner, LLP, Washington, DC, USA

Kerstin Reimers , Department of Plastic, Hand- and Reconstructive Surgery, Hannover Medical School, Hannover, Germany

Tan Yong Sheng Edgar , School of Mechanical & Aerospace Engineering, Nanyang Technological University, Singapore

Rohan Shirwaiker , Department of Industrial and Systems Engineering, North Carolina State University, Raleigh, NC, USA

S.C. Sklare , Department of Physics and Engineering Physics, Tulane University, New Orleans, LA, USA

Binil Starly , Department of Industrial and Systems Engineering, North Carolina State University, Raleigh, NC, USA

Joshua P. Temple , Department of Biomedical Engineering, Translational Tissue Engineering Center, Johns Hopkins University School of Medicine, Baltimore, MD, USA

Filippos Tourlomousis , Department of Mechanical Engineering, Stevens Institute of Technology, Hoboken, NJ, USA