Coleman - Fantasy creatures in clay: techniques for sculpting dragons, griffins and more

Sign up for our newsletter and receive special offers, access to free content, and information on the latest new releases and must-have art resources! Plus, receive a coupon code to use on your first purchase from NorthLightShop.com for signing up.

or visit us online to sign up at

http://artistsnetwork.com/ebook-promo

acrylic paints, assorted

aluminum foil

Apoxie Sculpt epoxy putty

clay: Super Sculpey, Super Sculpey Firm, Sculpey III, Premo! and/or Monster Clay

drawing paper

glassine paper

Mod Podge

Pearl Ex powder

primer paint, spray-on

sealant, brush-on or spray-on

varnishes, spray-on and clear brush-on

wire mesh, medium gauge recommended

wire, various gauges: fine, medium and heavy

wood bases

wood beads, black

craft knife and blades

hammer

heat gun (optional)

hot glue gun (low-temperature) and glue sticks

metal detail tool

metal or wire ribbon tool

needle tool

oven, conventional not microwave

paintbrushes, assorted including firm soft-bristled, large round-tipped and small fine-detail

pasta machine (optional)

pencil

permanent marker

pliers

rubber tools

scissors

straightedge

texture stamps (optional)

watercolor pencils

wire cutters

wooden tools (optional)

cornstarch (baby powder optional)

glue (optional)

masking tape (optional)

newspapers

palette

paper towels

reference photos and anatomy books

rubbing alcohol

sandpaper, 220 grit or finer

Super Glue or epoxy glue

U-nails

For me, sculpture was mostly a self-taught skill. I never went to art school. I have my degree in digital media, which has very little to do with traditional hands-on art. There were only a few sculpture books on the market when I first began sculpting in 2001, and most of them were rather outdated. None of them directly applied to the field of work that I wanted to get into. I learned about where to start from Katherine Deweys writings, namely Creating Life-Like Animals in Polymer Clay. I mostly referenced anatomy books, photos, pre-existing sculptures and real life. Practice, practice, practice is the main reason Ive gotten to the point I am now. At the time of this writing, Ive created hundreds of sculptures of varying size, complexity and subject matter.

With each sculpture, I try to learn something new. Even if its a small step each time, I am always learning and growing. Every now and then, I like to do a piece that is completely out of my comfort zone and interest range. I will experiment with a new style or sculpt an animal I have never heard of before. After I do this, my art takes a turn in a new direction and shows great improvement.

In 2006 I began teaching at Full Sail University in Winter Park, Florida. I worked in the computer animation department and focused on traditional art. I learned a lot through teaching others for five and a half years. My former job has been a big inspiration for writing this book.

I know how difficult it is getting started in sculpture. There is a serious lack of tutorials and reference for beginning sculptors. There were points (and still are sometimes!) when I was ready to tear my hair out in frustration. This book is to help you skip that step and get right into learning your own style and methods in sculpting.

I have not written this book in a step-by-step how-to-recreate-this piece style. The reason for this is that in order to be a successful artist, you need to learn to apply techniques to your own ideas and creations. Use this book as a starting point and develop your own ideas as you go though it. Rather than recreating the pieces I have done in this book, apply the techniques demonstrated to your own works.

I will be covering all the information you need to complete a sculpture. I will start with an introduction to the materials needed, moving on to armature building and blocking out the main forms with clay. From there, I will discuss various techniques on detailing a sculpture from anatomy to texture. I will then cover painting and finishing techniques to apply to your piece.

Creating this book has been a learning process for me. I hope you also learn from it and get introduced to some new concepts and techniques.

Enjoy, and happy sculpting!

Many materials can be used in sculpture. When starting out, it can be a bit overwhelming. To choose the correct medium, you must first understand the proper applications of each so you can select the best one for you.

Polymer clay is soft and pliable, but will become hard and ceramic-like when baked. The plasticisers in the clay react to heat and can be baked in a home oven at a low temperature. Baked polymer clay can be sanded, carved and painted.

Oil-based clay always remains pliable and is unable to be cured and hardened. Many of these clays are wonderful to work with, but they require molding and casting to create a finished, painted piece.

Epoxy clays are two-part molding compounds that cure when equal amounts of both parts are combined. These clays cure to a rock solid state after a workable period of several hours.

In this book, we will be using both polymer clay and oil-based clay to work with different techniques. I will also show how Epoxy clay can be used in conjunction with polymer clays. Keep in mind many of the techniques shown can be used with other clays too!