Contents
List of tables
- Tables in Chapter 1
- Tables in Chapter 2
- Tables in Chapter 3
- Tables in Chapter 4
- Tables in Chapter 5
- Tables in Chapter 7
- Tables in Chapter 11
- Tables in Chapter 12
List of figures
- Figures in Chapter 1
- Figures in Chapter 2
- Figures in Chapter 3
- Figures in Chapter 4
- Figures in Chapter 5
- Figures in Chapter 6
- Figures in Chapter 7
- Figures in Chapter 8
- Figures in Chapter 9
- Figures in Chapter 10
- Figures in Chapter 11
- Figures in Chapter 12
Landmarks
Polymer Nanocomposite-Based Smart Materials
From Synthesis to Application
Woodhead Publishing Series in Composites Science and Engineering
Edited by
Rachid Bouhfid
Abou el Kacem Qaiss
Mohammad Jawaid
Contents
Copyright
Woodhead Publishing is an imprint of Elsevier
The Officers Mess Business Centre, Royston Road, Duxford, CB22 4QH, United Kingdom
50 Hampshire Street, 5th Floor, Cambridge, MA 02139, United States
The Boulevard, Langford Lane, Kidlington, OX5 1GB, United Kingdom
Copyright 2020 Elsevier Ltd. All rights reserved.
No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying, recording, or any information storage and retrieval system, without permission in writing from the publisher. Details on how to seek permission, further information about the Publishers permissions policies and our arrangements with organizations such as the Copyright Clearance Center and the Copyright Licensing Agency, can be found at our website: www.elsevier.com/permissions.
This book and the individual contributions contained in it are protected under copyright by the Publisher (other than as may be noted herein).
Notices
Knowledge and best practice in this field are constantly changing. As new research and experience broaden our understanding, changes in research methods, professional practices, or medical treatment may become necessary.
Practitioners and researchers must always rely on their own experience and knowledge in evaluating and using any information, methods, compounds, or experiments described herein. In using such information or methods they should be mindful of their own safety and the safety of others, including parties for whom they have a professional responsibility.
To the fullest extent of the law, neither the Publisher nor the authors, contributors, or editors, assume any liability for any injury and/or damage to persons or property as a matter of products liability, negligence or otherwise, or from any use or operation of any methods, products, instructions, or ideas contained in the material herein.
Library of Congress Cataloging-in-Publication Data
A catalog record for this book is available from the Library of Congress
British Library Cataloguing-in-Publication Data
A catalogue record for this book is available from the British Library
ISBN: 978-0-08-103013-4 (print)
ISBN: 978-0-08-103014-1 (online)
For information on all Woodhead publications visit our website at https://www.elsevier.com/books-and-journals
Publisher: Susan Dennis
Acquisitions Editor: Gwen Jones
Editorial Project Manager: Ana Claudia Garcia
Production Project Manager: Vignesh Tamil
Designer: Victoria Pearson
Typeset by Thomson Digital
Dedication
Editors are honored to dedicate this book to Research Collaboration
between
Composites and Nanocomposites Center, at Moroccan Foundation for Advanced Science, Innovation and Research (MAScIR), Morocco
and
Laboratory of Biocomposite Technology, Institute of Tropical Forestry and Forest Products (NTROP), Universiti Putra Malaysia, Malaysia
Contributors
Hind Abdellaoui , Moroccan Foundation for Advanced Science, Innovation and Research (MAScIR), Composites and Nanocomposites Center, Rabat, Morocco
Mohd Zaid. Akop , Center for Advanced Research on Energy, Universiti Teknikal Malaysia Melaka, Durian Tunggal, Melaka, Malaysia
Prithvi C. Asapur , Central University of Gujarat, Gandhinagar, Gujarat, India
Indrani Banerjee , Central University of Gujarat, Gandhinagar, Gujarat, India
Mohammed-ouadi Bensalah , University Mohammed VRabat, Faculty of Science, Rabat, Morocco
Anuradha Biswal , Department of Chemistry, Veer Surendra Sai University of Technology, Sambalpur, India
Rachid Bouhfid , Moroccan Foundation for Advanced Science, Innovation and Research (MAScIR), Composites and Nanocomposites Center, Rabat, Morocco
Jorold John Britto , Department of Mechanical Engineering, Ramco Institute of Technology, Rajapalayam, Tamil Nadu, India
Hind Chakchak , The Technical Support Units for Scientific Research (UATRS)/The National Center for Scientific and Technical Research (CNRST), Rabat, Morocco
Mounir El Achaby , Materials Science and Nanoengineering Department (MSN), Mohammed VI Polytechnic University (UM6P), Benguerir, Morocco
Hamid Essabir
Moroccan Foundation for Advanced Science, Innovation and Research, Rabat, Morocco
Ibn Zohr UniversityAgadir, National School of Applied Sciences, Agadir, Morocco
K. Ganesh , Department of Mechanical Engineering, Eritrea Institute of Technology, Mai-Nefhi, Asmara, Eritrea
Ouassim Hamdi , Department of Chemical Engineering, Universit Laval, Quebec, Canada
Mohammad Jawaid , Institute of Tropical Forestry and Forest Products (INTROP), Universiti Putra Malaysia, Serdang, Malaysia
Naveen Jusuarockiam , Department of Mechanical and Manufacturing Engineering, Universiti Putra Malaysia, Serdang, Malaysia
Nor Ain Shahera Khairi , Institute of Advanced Technology, Universiti Putra Malaysia, Serdang, Selangor, Malaysia
Anish Khan , Center of Excellence for Advanced Materials Research, King Abdulaziz University, Jeddah, Saudi Arabia
Senthil kumar Krishnasamy
Department of Mechanical Engineering, Kalasalingam Academy of Research and Education, Krishnankoil, Tamil Nadu, India
Department of Mechanical and Process Engineering, The Sirindhorn International Thai-German Graduate School of Engineering (TGGS), King Mongkuts University of Technology North Bangkok, Bangkok, Thailand
Centre for Composite Materials, International Research Centre, Kalasalingam Academy of Research and Education, Krishnankoil, Tamil Nadu, India
R. Kumar , Department of Mechanical Engineering, Eritrea Institute of Technology, Mai-Nefhi, Asmara, Eritrea
Muhd Ridzuan. Mansor , Center for Advanced Research on Energy, Universiti Teknikal Malaysia Melaka, Durian Tunggal, Melaka, Malaysia
Mohamed El Mehdi Mekhzoum , Moroccan Foundation for Advanced Science, Innovation and Research (MAScIR), Composites and Nanocomposites Center, Rabat, Morocco
Frej Mighri , Department of Chemical Engineering, Universit Laval, Quebec, Canada
Chandrasekar Muthukumar , School of Aeronautical Sciences, Hindustan Institute of Technology & Science, Chennai, Tamil Nadu, India